3 Best Central Heating Systems
Central heating systems require energy efficiency and control. When optimized, they can improve the standard of living and working in a residence or business respectively. Even so, knowing how to go beyond space heaters and wood stoves will require some research. We know the three best central heating systems, and how best to use them.
Different Types Of Heating Systems
Split Heat Pumps
Split heat pumps are either miniature or standard. The standard model is the most popular on the market, and they are designed to work the way that air conditioners do. Miniature heat pumps lack ducts, meaning they are an air-source system. They are best in hot and warm climates, where outdoor heat is abundant. We recommend installing them closer to the Equator for this reason.
Heat pumps remove heat from the outside air, any that the system can find, using refrigerant. The refrigerant circulates from the outdoor units to the indoor ones.
Because they don’t create heat but rather collect it, heat pumps are very affordable and energy-efficient despite the higher cost of installation. Inverter technology controls the rate of heating and cooling to a precise detail. This allows for more control.
When you want efficiency, you go with a gas furnace. These burn controlled amounts of natural gas or propane, to generate the necessary heat for air and then funnel it throughout a residential or business building. Heat exchangers manage the combustion gases as they pass into a sealed exhaust. The blower fan transports the heat with air through the ducts, that then circulate throughout the area.
Gas furnaces have a high efficiency rating. They work with variable speeds depending on the model and cost less than heat pumps. The fuel oil tends to be affordable and safe for use, with precautions.
Brands such as Laars are good for that, with providing necessary gaskets and pump housing. They focus on making sure the heat transports evenly and make sure that the gas burning is safe for the people nearby, and HVAC experts working on them.
These are the least popular, relatively speaking of the three central heating systems, due to being older and established. Nevertheless, gas boilers demonstrate efficiently. It uses a different method to circulate hot air and generate heat.
Gas such as propane heats water to a boiling point. Two different pump systems take the boiling water; one transports it to radiators for zoned heating. The other pump transports the water through radiant heat piping, which circulates it through an entire building. This allows for better regulation of zone thermostats.
Condensing and non-condensing boilers are quiet, and have a high annual fuel utilization efficiency. They reduce the amount of potential allergens due to moving around hot water rather than warm air. The drawback is they cost more to install and operate.
Browse Heating Equipment At Furnace Part Source
Furnace Part Source wants to help people with their central heating, and to prepare for when colder weather lasts longer than expected. We want to help people with their distribution systems, with expertise on both gas and electric furnitures. Our specialists can identify which heating and cooling parts are ideal for repair and replacement within established systems.
Reach out to us today to get started with heating your home efficiently. Know how to implement cost-effective furnaces that provide ideal heat distribution. Furnace Part Source knows how to optimize the annual fuel utilization efficiency for forced air systems.