null

4 Ways To Prepare Your Furnace For Winter

7th Dec 2020

With the winter months getting cold, residents in homes and businesses want to reduce the potential for broken furnaces or malfunctioning ones. When heat loss happens, then customers can risk their health and comfort. Here are four ways to prepare your furnace for winter.

Furnace Maintenance And Preparation Tips

We always recommend scheduling an inspection with an HVAC technician before cold weather arrives, so that you have time to address any potential issues. There are several ways to identify problems so that you can start with solutions.

Check For Cold Spots

Sometimes a furnace fails to heat an entire area completely. Then certain spots remain cold over a period of time. It’s usually a signal that the heating system is the wrong size or carrying capacity for the residence or business. Even if your heating and cooling systems are too big, they can also create these spots and identify inefficiencies.

In other cases, cold spots happen from poor insulation. If this is the case, then identifying where to replace the insulation will not only prevent loss of energy but also improve into heating. Cold spots can also indicate that the duct systems are poorly structured, and an HVAC specialists can make suggestions for improvement with exposed ducts.

Clean Filters Regularly

The furnace filters are designed to catch potential contaminants. As a result, however, they can become clogged and risk a carbon monoxide buildup. Carbon monoxide is a dangerous gas that can suffocate habitants with a house.

Check your disposable filters every one to three months, and stock replacements for when they get dirty. They may require further inspection in climates that are dry or dusty or both, such as in desert areas.

Oil The Blower Motor

The blower motor as well as its belt requires lubrication to prevent potential frays or cracks, as do oil ports within the blower shaft. Only add a few drops of motor oil at a time, and check for signs of damage. Over-lubrication can cause problems, so proceed with caution. Prepare to remove access plates to reach the ports.

Some blower motors have grease cups. Instead of adding oil to any ports, add to these cups and replace any access plates. Replace any broken belts.

Install A Programmable Thermostat

Programmable thermostats allow you to make the system energy efficient. By applying direct control to heating and indoor air. It also adjusts depending on how many residents are in the area.

Stock up on batteries for the thermostats, so that you can replace them at a moment’s notice. Decide on ideal scheduling to get lower energy bills and a higher level of comfort.

How To Clean Your Furnace Before Winter

When cleaning your furnace, brush out or vacuum your heat exchanger. Dust can collect and cause clogs in airflow.

If you have a chimney or a carbon monoxide detector, check them for potential buildup. Chimneys should allow for a steady airflow, and you want to reduce the risk of carbon monoxide poisoning. An HVAC specialist can remove any buildup.

Become More Energy-Efficient With Furnace Part Source

At Furnace Part Source, find the tools that HVAC specialists need for air conditioning and heating. Winterize furnaces with ease when you follow our tips and instructions, and look at our array of parts when you need to make repairs or replacements for customers.

Reach out to us today to find out why a residence’s furnace isn’t working, and if the air filters or carbon monoxide detectors need replacing. Our priority is to ensure that you have the steps to prevent potential heat loss, before the weather gets colder. Furnace Part Source knows how to reduce fire hazards and improve air quality.