HVAC Blower Wheels

Shop HVAC blower wheels, including squirrel cage and inducer wheels, for furnaces, air handlers, and related equipment. Furnace Part Source carries replacement wheels by diameter, width, bore size, and rotation to match your existing blower assembly.

Use the product list below to find the correct blower wheel by part number, dimensions, or equipment model. Always confirm the wheel diameter, width, bore size, and rotation direction before ordering to help avoid fitment issues.

There are no products listed under this category.

HVAC Blower Wheels

A blower wheel, sometimes called a squirrel cage wheel, moves air through the furnace or air handler when driven by the blower motor. Over time, blower wheels can become unbalanced, cracked, or clogged with debris, which can reduce airflow and cause noise or vibration.

Furnace Part Source carries a range of blower wheels and inducer wheels for residential and light-commercial HVAC equipment, sized to fit a variety of blower housings and motor shafts.

Common Wheel Types We Carry

Common wheel types include:

Squirrel cage blower wheels for main furnace and air handler blowers.
Inducer wheels for induced draft venter motor assemblies.
Direct-drive wheels that mount directly to the motor shaft.

How to Find the Right Blower Wheel

Before ordering, measure the existing wheel's diameter, width, and bore size, and confirm the rotation direction (clockwise or counterclockwise, viewed from the drive end). Small differences in bore size or width can affect balance and fitment.

For best fit, compare:

Original wheel part number
Diameter and width
Bore size and set screw configuration
Rotation direction
Equipment model, if using an OEM-specific wheel

Confirm Fit Before Ordering

Matching by exact part number is the safest way to confirm compatibility. If the original part number is not available, compare the diameter, width, bore size, and rotation direction before placing your order. An incorrectly sized or unbalanced wheel can cause noise, vibration, or premature motor wear.

Need Help Matching a Blower Wheel?

Not sure which blower wheel you need? Use the dimensions and part number from your existing wheel to narrow the search, or contact Furnace Part Source for help identifying the correct replacement.

Blower Wheel FAQs

What are signs of a failing blower wheel?

Common signs include rattling or scraping noise, vibration, reduced airflow, or visible cracks and debris buildup on the wheel.

How do I measure a blower wheel for replacement?

Measure the outer diameter, the width (or height), and the bore size where the wheel mounts to the motor shaft. These three measurements are typically listed in the product name.

Does the rotation direction matter when ordering a wheel?

Yes. Blower wheels are designed for a specific rotation direction, and installing the wrong rotation can significantly reduce airflow and efficiency.

Can I clean a blower wheel instead of replacing it?

If the wheel is not cracked, warped, or unbalanced, cleaning may restore airflow. If the wheel is damaged, replacement is recommended for safe and efficient operation.